Project

General

Profile

Actions
Copy link

Bug #706

closed

detect.alert - not incrementing in daemon mode

Added by Peter Manev almost 12 years ago. Updated over 11 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Eric Leblond
Target version:
1.4.1
Affected Versions:
Effort:
Difficulty:
Label:

Description

On our teams test box - even though we receive a big number of alerts,
the detect.alert counter in stats.log is not incrementing.

Files

Bug706.txt (65.7 KB) Bug706.txt Peter Manev, 02/24/2013 01:45 PM
Actions
Copy link
 #1

Updated by Victor Julien almost 12 years ago

Basic info is missing: version (rev), runmode, etc.

Actions
Copy link
 #2

Updated by Peter Manev almost 12 years ago

Please find the basic info needed below:

suricata --build-info
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:560) <Info> (SCPrintBuildInfo) -- This is Suricata version 1.4dev (rev 5f4c528)
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:633) <Info> (SCPrintBuildInfo) -- Features: PCAP_SET_BUFF LIBPCAP_VERSION_MAJOR=1 PF_RING AF_PACKET HAVE_PACKET_FANOUT LIBCAP_NG LIBNET1.1 HAVE_HTP_URI_NORMALIZE_HOOK HAVE_HTP_TX_GET_RESPONSE_HEADERS_RAW HAVE_NSS PROFILING
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:647) <Info> (SCPrintBuildInfo) -- 64-bits, Little-endian architecture
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:649) <Info> (SCPrintBuildInfo) -- GCC version 4.6.3, C version 199901
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:655) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_1
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:658) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_2
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:661) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:664) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:667) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_16
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:671) <Info> (SCPrintBuildInfo) -- compiled with -fstack-protector
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:677) <Info> (SCPrintBuildInfo) -- compiled with _FORTIFY_SOURCE=2
[8174] 14/1/2013 -- 14:59:20 - (suricata.c:680) <Info> (SCPrintBuildInfo) -- compiled with libhtp 0.2.11, linked against 0.2.11

using af_packet/workers

anything else that might be helpful?

Actions
Copy link
 #3

Updated by Victor Julien almost 12 years ago

Are other counters being updated normally?

Actions
Copy link
 #4

Updated by Peter Manev almost 12 years ago

funny you say that...
actually no - it does not look like all of them are incremented - some are, but most are not (Ex):

capture.kernel_packets | AFPacketeth316 | 0
capture.kernel_drops | AFPacketeth316 | 0
decoder.pkts | AFPacketeth316 | 0
decoder.bytes | AFPacketeth316 | 0
decoder.ipv4 | AFPacketeth316 | 0
decoder.ipv6 | AFPacketeth316 | 0
decoder.ethernet | AFPacketeth316 | 0
decoder.raw | AFPacketeth316 | 0
decoder.sll | AFPacketeth316 | 0
decoder.tcp | AFPacketeth316 | 0
decoder.udp | AFPacketeth316 | 0
decoder.sctp | AFPacketeth316 | 0
decoder.icmpv4 | AFPacketeth316 | 0
decoder.icmpv6 | AFPacketeth316 | 0
decoder.ppp | AFPacketeth316 | 0
decoder.pppoe | AFPacketeth316 | 0
decoder.gre | AFPacketeth316 | 0
decoder.vlan | AFPacketeth316 | 0
decoder.teredo | AFPacketeth316 | 0
decoder.ipv4_in_ipv6 | AFPacketeth316 | 0
decoder.ipv6_in_ipv6 | AFPacketeth316 | 0
decoder.avg_pkt_size | AFPacketeth316 | 0
decoder.max_pkt_size | AFPacketeth316 | 0
defrag.ipv4.fragments | AFPacketeth316 | 0
defrag.ipv4.reassembled | AFPacketeth316 | 0
defrag.ipv4.timeouts | AFPacketeth316 | 0
defrag.ipv6.fragments | AFPacketeth316 | 0
defrag.ipv6.reassembled | AFPacketeth316 | 0
defrag.ipv6.timeouts | AFPacketeth316 | 0
defrag.max_frag_hits | AFPacketeth316 | 0
tcp.sessions | AFPacketeth316 | 0
tcp.ssn_memcap_drop | AFPacketeth316 | 0
tcp.pseudo | AFPacketeth316 | 0
tcp.invalid_checksum | AFPacketeth316 | 0
tcp.no_flow | AFPacketeth316 | 0
tcp.reused_ssn | AFPacketeth316 | 0
tcp.memuse | AFPacketeth316 | 0
tcp.syn | AFPacketeth316 | 0
tcp.synack | AFPacketeth316 | 0
tcp.rst | AFPacketeth316 | 0
tcp.segment_memcap_drop | AFPacketeth316 | 0
tcp.stream_depth_reached | AFPacketeth316 | 0
tcp.reassembly_memuse | AFPacketeth316 | 0
tcp.reassembly_gap | AFPacketeth316 | 0
detect.alert | AFPacketeth316 | 0
flow_mgr.closed_pruned | FlowManagerThread | 717373974
flow_mgr.new_pruned | FlowManagerThread | 1260698120
flow_mgr.est_pruned | FlowManagerThread | 216749232
flow.memuse | FlowManagerThread | 362540720
flow.spare | FlowManagerThread | 1089093
flow.emerg_mode_entered | FlowManagerThread | 0
flow.emerg_mode_over | FlowManagerThread | 0

thanks

Actions
Copy link
 #5

Updated by Victor Julien almost 12 years ago

@Eric Liu could we be staying in AFPReadFromRing all the time? We need to call SCPerfSyncCountersIfSignalled(tv, 0); regularly for counters to work. It is called from ReceiveAFPLoop, but maybe we never leave AFPReadFromRing?

@Peter Pan, are the counters updated when you stop suri?

Actions
Copy link
 #6

Updated by Peter Manev almost 12 years ago 

@Peter, are the counters updated when you stop suri?

no, they are not.

Actions
Copy link
 #7

Updated by Peter Manev almost 12 years ago

Here the issue is similar to
https://redmine.openinfosecfoundation.org/issues/714

in -D mode it does not write counters info in stats.log - but in regular mode (non daemon) it updates the stats.log no problem.

root@suricata:/var/data/regit/log/suricata# suricata --build-info
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:560) <Info> (SCPrintBuildInfo) -- This is Suricata version 1.4dev (rev 5f4c528)
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:633) <Info> (SCPrintBuildInfo) -- Features: PCAP_SET_BUFF LIBPCAP_VERSION_MAJOR=1 PF_RING AF_PACKET HAVE_PACKET_FANOUT LIBCAP_NG LIBNET1.1 HAVE_HTP_URI_NORMALIZE_HOOK HAVE_HTP_TX_GET_RESPONSE_HEADERS_RAW HAVE_NSS PROFILING
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:647) <Info> (SCPrintBuildInfo) -- 64-bits, Little-endian architecture
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:649) <Info> (SCPrintBuildInfo) -- GCC version 4.6.3, C version 199901
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:655) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_1
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:658) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_2
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:661) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:664) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:667) <Info> (SCPrintBuildInfo) -- __GCC_HAVE_SYNC_COMPARE_AND_SWAP_16
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:671) <Info> (SCPrintBuildInfo) -- compiled with -fstack-protector
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:677) <Info> (SCPrintBuildInfo) -- compiled with _FORTIFY_SOURCE=2
[23104] 19/1/2013 -- 13:01:43 - (suricata.c:680) <Info> (SCPrintBuildInfo) -- compiled with libhtp 0.2.11, linked against 0.2.11
Actions
Copy link
 #8

Updated by Victor Julien almost 12 years ago

  • Subject changed from detect.alert - not incrementing to detect.alert - not incrementing in daemon mode
  • Assignee set to OISF Dev
  • Target version set to 1.4.1

Is 1.3.5 also affected?

Actions
Copy link
 #9

Updated by Victor Julien over 11 years ago

Peter, how did you start suricata?

I noticed the following: when testing like this: "suricata -i eth0 -c suricata.yaml -S local.rules -D" it didn't work. "detect.alert" not incrementing, fast.log empty.

When I looked at Suricata's output however, I noticed what causes it. local.rules was not found. When not in daemon mode, the CWD is where ever you start suri, in daemon mode the CWD is /. So local.rules was loaded from /local.rules, and it wasn't there.

When I started like this "suricata -c suricata.yaml -i eth0 -S /full/path/to/local.rules -D" it works. Both detect.alert and fast.log are fine in this case.

Actions
Copy link
 #10

Updated by Peter Manev over 11 years ago

suricata -c /etc/suricata.yaml --af-packet=eth3 -D

is how i started it.

Actions
Copy link
 #11

Updated by Victor Julien over 11 years ago

Hmm, then I can't reproduce the issue. AF_PACKET + workers, in daemon mode:

detect.alert              | AFPacketeth01             | 0
detect.alert              | AFPacketeth02             | 0
detect.alert              | AFPacketeth03             | 1
detect.alert              | AFPacketeth04             | 0
detect.alert              | AFPacketeth05             | 1
detect.alert              | AFPacketeth06             | 0
detect.alert              | AFPacketeth07             | 1
detect.alert              | AFPacketeth08             | 1
detect.alert              | AFPacketeth09             | 1
detect.alert              | AFPacketeth010            | 0
detect.alert              | AFPacketeth011            | 0
detect.alert              | AFPacketeth012            | 0
detect.alert              | AFPacketeth013            | 0
detect.alert              | AFPacketeth014            | 0
detect.alert              | AFPacketeth015            | 1
detect.alert              | AFPacketeth016            | 0
detect.alert              | AFPacketeth017            | 0
detect.alert              | AFPacketeth018            | 0
detect.alert              | AFPacketeth019            | 0
detect.alert              | AFPacketeth020            | 0
detect.alert              | AFPacketeth021            | 0
detect.alert              | AFPacketeth022            | 0
detect.alert              | AFPacketeth023            | 1
detect.alert              | AFPacketeth024            | 0
detect.alert              | AFPacketeth025            | 1
detect.alert              | AFPacketeth026            | 0
detect.alert              | AFPacketeth027            | 2
detect.alert              | AFPacketeth028            | 1
detect.alert              | AFPacketeth029            | 0
detect.alert              | AFPacketeth030            | 0
detect.alert              | AFPacketeth031            | 0
detect.alert              | AFPacketeth032            | 0

Can you send over your yaml?

Actions
Copy link
 #12

Updated by Peter Manev over 11 years ago

shared the yaml.
I also attached some more info - after running for about 8:45 min ... all counters(except 4) are 0..
which is puzzling.

Actions
Copy link
 #13

Updated by Eric Leblond over 11 years ago

  • % Done changed from 0 to 90

https://github.com/inliniac/suricata/pull/298 is implementing a workaround based on Victor's analysis. This has been deployed on our test box and seems to work.

Actions
Copy link
 #14

Updated by Peter Manev over 11 years ago

The patch seems to do the job correctly.

Actions
Copy link
 #15

Updated by Victor Julien over 11 years ago

  • Status changed from New to Closed
  • % Done changed from 90 to 100
Actions
Copy link
 #16

Updated by Victor Julien over 11 years ago

  • Assignee changed from OISF Dev to Eric Leblond
Actions
Copy link

Also available in: Atom PDF